Core Positioning: The "All-Weather Power Guardian" for Uninterrupted Outdoor Surveillance

　　For security installers, property managers, and outdoor monitoring teams, traditional power supplies fail to meet three critical needs of outdoor security cameras: vulnerability to harsh weather (rain/dust/salt fog damages internal components), power outage risks (sudden shutdowns cause monitoring gaps), and incompatibility with camera types (POE/DC cameras need different power sources). This weather-resistant interchangeable power supply solves these pain points through military-grade environmental protection, security-camera-specific adaptation, and hot-swappable backup design, enabling "365-day reliable operation in -30℃~85℃, seamless power for POE/DC cameras, and zero-downtime battery replacement". It acts as a permanent power backbone for outdoor surveillance—no more costly monitoring blind spots or frequent on-site repairs due to power failures.

　　Three Core Advantages for Outdoor Security Cameras

　　1. Military-Grade Weather Resistance: Survive Extreme Outdoor Conditions

　　IP67 Fully Sealed Protection: Exceeds standard IP65 with full-body rubber gaskets and sealed interfaces—resists heavy rain (30min water immersion at 1m), sandstorms in deserts, and snow accumulation on camera poles. Complies with IEC 60529, ensuring no water/dust ingress even in typhoon-prone coastal areas.

　　Wide Temperature & Corrosion Resistance: Operates stably from -30℃ (arctic cold for northern border monitoring) to 85℃ (direct sun exposure on roof-mounted cameras), with low-temperature startup technology (no battery freezing) and high-temperature heat dissipation (aluminum alloy housing + silent heat sinks). Housing adopts marine-grade 316 stainless steel (optional) for salt fog resistance—ideal for seaside docks or offshore platforms, avoiding rust damage within 10+ years.

　　Lightning & Surge Protection: Built-in 20kV surge protection (compliant with IEC 61000-4-5) and 10kA lightning protection—shields cameras from outdoor grid surges (e.g., thunderstorms) or voltage spikes, preventing camera motherboard burnout (a top cause of outdoor camera failures).

　　2. Security-Camera-Specific Power Adaptation

　　Dual Power Modes for All Camera Types: Supports both POE (802.3af/at) and DC power output to cover 99% of outdoor security cameras:

　　POE mode (15.4W/30W): Powers POE dome cameras (e.g., Hikvision DS-2CD2146G2-I) and PTZ cameras (e.g., Dahua SD6C230U-HNI) via a single network cable, eliminating separate power wiring.

　　DC mode (12V/24V, 0.5A-3A): Fits DC-powered bullet cameras (e.g., Dahua DH-IPC-HFW5449E) and infrared (IR) fill light modules—adjustable voltage matches camera power demands (12V for most bullet cameras, 24V for high-power PTZ cameras).

　　24/7 Stable Output for Surveillance: Voltage regulation accuracy ±0.3% and ripple & noise <20mV—avoids IR flicker (common with unstable power) or camera rebooting during night monitoring. Designed for continuous 24/7 operation (MTBF > 150,000 hours), far exceeding the 8-hour daily use of consumer power supplies.

　　Installation-Friendly Design: Supports three mounting methods to match camera setups:

　　Pole-mount (with adjustable U-bracket) for streetlight/pole-mounted cameras;

　　Wall-mount (with waterproof screws) for wall-mounted bullet cameras;

　　Junction box integration (fits standard 100mm electrical boxes) for hidden installation—all mounting parts are corrosion-resistant (304 stainless steel) to avoid rust loosening.

　　3. Hot-Swappable Backup Modules: Zero-Downtime Monitoring

　　N+1 Redundant Power System: Includes 2 interchangeable modules (main AC module + backup battery module) with N+1 redundancy:

　　AC Main Module (100-240V universal input): Provides continuous power for cameras via POE/DC, with built-in overcharge protection for the backup module.

　　Backup Battery Module (15000mAh, 54Wh): Automatically takes over in <5ms when AC power fails (e.g., grid outages, cable cuts), supporting 12+ hours of runtime for a 12V bullet camera (with IR on) or 8+ hours for a POE PTZ camera—enough to cover overnight outages until power is restored.

　　Tool-Free Hot Swapping: Modules connect via a locking waterproof connector—technicians can replace a low-battery backup module in 15 seconds (even in rain) without powering off the camera. The AC module recharges the backup module in 3 hours, ensuring it’s always ready for emergencies.

　　Remote Power Monitoring: Integrates with security systems via RS485 or WiFi—security teams can remotely check module status (battery level, output voltage, temperature) through a central dashboard. Sends alerts (SMS/email) for low battery (<20%) or module faults (e.g., AC power loss), enabling proactive maintenance before monitoring gaps occur.

　　Empowering Outdoor Surveillance Scenarios

　　Residential & Commercial Perimeters: Powers wall-mounted bullet cameras around communities or parking lots—IP67 protection handles rain/snow, and backup modules prevent monitoring gaps during power outages (critical for overnight security).

　　Wilderness & Forest Monitoring: Supplies power to solar-charged cameras in national parks or forest reserves—battery modules store solar energy for night use, and -30℃ low-temperature resistance adapts to mountainous winter conditions.

　　Coastal & Marine Areas: Uses 316 stainless steel housing to resist salt fog for docks or offshore platform cameras—POE mode simplifies wiring across long distances, and surge protection shields against sea breeze-induced voltage spikes.

　　Critical Infrastructure (Roads/Railways): Powers pole-mounted PTZ cameras along highways or railways—pole-mount design matches traffic camera installation, and vibration resistance (IEC 60068-2-6) handles vehicle-induced shaking without loose connections.

　　Security-Focused Cooperation & Support

　　Security Industry Certifications: Certified by CE, FCC, RoHS 2.0, GB 4943.1 (China security equipment standard), and EN 55032 (EMC for surveillance systems)—meets global security equipment compliance requirements, avoiding rejection in project tenders.

　　Customization for Security Projects: Offers project-specific customization:

　　Extended battery runtime (up to 20000mAh for 24-hour backup in remote areas);

　　Custom POE output (802.3bt for high-power cameras);

　　Branded housing (with security company logos) for uniform project deployment.

Read recommendations:

60W 6USB charger

LED Power Supply H

PD100W-140W UK PD Charger

300W switching power supply wholesaler.5V Adapter Power

CE FCC Certified 60W Interchangeable Adapter with 3V-24V Variable Voltage for Laptops and Cameras